Beyond antiviral: role of IFN-I in brain development.

Interferons and central nervous system resident macrophages, microglia, are well-known for their respective roles in antiviral defense and phagocytosis. Using a classic experimental paradigm for examining activity-dependent neural plasticity, Escoubas, Dorman, et al. recently identified a role for microglial type I interferon signaling in the clearance of unwanted neurons during mouse brain development.

Aqueous Ozone Efficacy for Inactivation of Foodborne Pathogens on Vegetables Used in Raw Meat-Based Diets for Companion Animals.

The present study evaluates the efficacy of a batch wash ozone sanitation system (BWOSS) and spray wash ozone sanitation system (SWOSS) against Listeria monocytogenes (two strains) and Salmonella enterica subsp. enterica (three serovars) inoculated on the surface of carrots, sweet potatoes, and butternut squash, commonly used in raw meat-based diets (RMBDs) marketed for companion animals such as dogs and cats. Produce either remained at room temperature for 2 h or were frozen at -20°C and then tempered overnight at 4°C to mimic the preprocessing steps of a raw pet food processing operation ('freeze-temper') prior to ozone treatment. Two ozone concentrations (0 and 5 ppm) were applied for either 20 s or 60 s for BWOSS and 20 s for SWOSS. Based on an ANOVA, BWOSS data showed no significant difference (P > 0.05) in microbial reduction between 0 and 5 ppm ozone concentration across all treatment durations for each produce type. BWOSS resulted in mean microbial reductions of up to 1.56 log CFU/mL depending on the treatment time and produce type. SWOSS data were analyzed using a generalized linear model with Quasipoisson errors. Freeze-tempered produce treated with SWOSS had a higher bacterial log reduction at 5 ppm ozone compared to 0 ppm ozone (P = 0.0013) whereas room temperature produce treated with SWOSS did not show any significant difference in microbial reduction between ozone concentrations. The potential to mitigate microbial cross-contamination was also investigated during SWOSS treatment. The results indicate that 5 ppm ozone decreased pathogens in the rinsate and proximal surfaces by 0.63-1.66 log CFU/mL greater than no ozone depending on the pathogen and sample. Overall, data from this study indicate that SWOSS would be more effective compared to BWOSS in reducing the microbial load present on the surface of root tubers and squash subjected to freezing and thawing and has the potential to mitigate cross-contamination within RMDB manufacturing environments.

Sensitivity optimization of a rhodopsin-based fluorescent voltage indicator.

The ability to optically image cellular transmembrane voltages at millisecond-timescale resolutions can offer unprecedented insight into the function of living brains in behaving animals. Here, we present a point mutation that increases the sensitivity of Ace2 opsin-based voltage indicators. We use the mutation to develop Voltron2, an improved chemigeneic voltage indicator that has a 65% higher sensitivity to single APs and 3-fold higher sensitivity to subthreshold potentials than Voltron. Voltron2 retained the sub-millisecond kinetics and photostability of its predecessor, although with lower baseline fluorescence. In multiple in vitro and in vivo comparisons with its predecessor across multiple species, we found Voltron2 to be more sensitive to APs and subthreshold fluctuations. Finally, we used Voltron2 to study and evaluate the possible mechanisms of interneuron synchronization in the mouse hippocampus. Overall, we have discovered a generalizable mutation that significantly increases the sensitivity of Ace2 rhodopsin-based sensors, improving their voltage reporting capability.

Draft Genome Sequences of 110 Shiga Toxin-Producing Escherichia coli Isolates Collected from Bovine Manure Samples in the Southern United States.

Shiga toxin-producing Escherichia coli (STEC) bacteria continue to impact the food industry. Environmental sampling of potential sources of contamination is important to aid epidemiologic efforts in tracking foodborne illnesses throughout the United States. Here, the draft genome sequences of 110 STEC isolates from bovine manure collected in Florida and Texas are reported.

Paclitaxel effects on axonal localization and vesicular trafficking of NaV1.8.

Patients treated with paclitaxel (PTX) or other antineoplastic agents can experience chemotherapy-induced peripheral neuropathy (CIPN), a debilitating side effect characterized by numbness and pain. PTX interferes with microtubule-based transport, which inhibits tumor growth via cell cycle arrest but can also affect other cellular functions including trafficking of ion channels critical to transduction of stimuli by sensory neurons of the dorsal root ganglia (DRG). We examined the effects of PTX on voltage-gated sodium channel NaV1.8, which is preferentially expressed in DRG neurons, using a microfluidic chamber culture system and chemigenetic labeling to observe anterograde channel transport to the endings of DRG axons in real time. PTX treatment increased the numbers of NaV1.8-containing vesicles traversing the axons. Vesicles in PTX-treated cells exhibited greater average velocity, along with shorter and less frequent pauses along their trajectories. These events were paralleled by greater surface accumulation of NaV1.8 channels at the distal ends of DRG axons. These results were consistent with observations that NaV1.8 is trafficked in the same vesicles containing NaV1.7 channels, which are also involved in pain syndromes in humans and are similarly affected by PTX treatment. However, unlike Nav1.7, we did not detect increased NaV1.8 current density measured at the neuronal soma, suggesting a differential effect of PTX on trafficking of NaV1.8 in soma versus axonal compartments. Therapeutic targeting of axonal vesicular traffic would affect both Nav1.7 and Nav1.8 channels and increase the possibilities of alleviating pain associated with CIPN.

Inflammation differentially controls transport of depolarizing Nav versus hyperpolarizing Kv channels to drive rat nociceptor activity.

Inflammation causes pain by shifting the balance of ionic currents in nociceptors toward depolarization, leading to hyperexcitability. The ensemble of ion channels within the plasma membrane is regulated by processes including biogenesis, transport, and degradation. Thus, alterations in ion channel trafficking may influence excitability. Sodium channel NaV1.7 and potassium channel KV7.2 promote and oppose excitability in nociceptors, respectively. We used live-cell imaging to investigate mechanisms by which inflammatory mediators (IM) modulate the abundance of these channels at axonal surfaces through transcription, vesicular loading, axonal transport, exocytosis, and endocytosis. Inflammatory mediators induced a NaV1.7-dependent increase in activity in distal axons. Further, inflammation increased the abundance of NaV1.7, but not of KV7.2, at axonal surfaces by selectively increasing channel loading into anterograde transport vesicles and insertion at the membrane, without affecting retrograde transport. These results uncover a cell biological mechanism for inflammatory pain and suggest NaV1.7 trafficking as a potential therapeutic target.

Surface Inactivation of a SARS-CoV-2 Surrogate with Hypochlorous Acid is Impacted by Surface Type, Contact Time, Inoculum Matrix, and Concentration.

Indirect contact with contaminated surfaces is a potential transmission route for COVID-19. Therefore, it is necessary to investigate convenient and inexpensive surface sanitization methods, such as HOCl, against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The SARS-CoV-2 surrogate, Phi6 (~ 7 log PFU/mL), was prepared in artificial saliva and tripartite matrices, spot inoculated on coupons of either stainless steel or vinyl, and allowed to dry. The coupons were sprayed with either 500 ppm or 1000 ppm HOCl, and remained on the surface for 0 s (control), 5 s, 30 s, or 60 s. Samples were enumerated via the double agar overlay assay. Statistical analysis was completed in R using a generalized linear model with Quasipoisson error approximations. Time, concentration, surface type, and inoculum matrix were all significant contributors to log reduction at P = 0.05. Significant three-way interactions were observed for 1000 ppm, vinyl, and 60 s (P = 0.03) and 1000 ppm, tripartite, and 60 s (P = 0.0121). A significant two-way interaction between vinyl and 60 s was also observed (P = 0.0168). Overall, increased HOCl concentration and exposure time led to increased Phi6 reduction. Notably, the highest estimated mean log reduction was 3.31 (95% CI 3.14, 3.49) for stainless steel at 60 s and 1000 ppm HOCl in artificial saliva, indicating that this method of sanitization may not adequately reduce enveloped viruses to below infective thresholds.

Transfer of Phi6 bacteriophage between human skin and surfaces common to consumer-facing environments.

AIMS: This study aimed to determine the extent of Phi6 (Φ6) transfer between skin and surfaces relevant to consumer-facing environments based on inoculum matrix, surface type and contact time. METHODS AND RESULTS: Φ6 transfer rates were determined from skin-to-fomite and fomite-to-skin influenced by inoculum matrix (artificial saliva and tripartite), surface type (aluminium, plastic, stainless steel, touchscreen, vinyl and wood) and contact time (5 and 10 s). Significant differences in estimated means were observed based on surface type (both transfer directions), inoculum matrix (skin-to-fomite) and contact time (both transfer directions). During a sequential transfer experiment from fomite-to-skin, the maximum number of consecutive transfer events observed was 3.33 ± 1.19, 2.33 ± 1.20 and 1.67 ± 1.21 for plastic, touchscreen and vinyl, respectively. CONCLUSIONS: Contact time significantly impacted Φ6 transfer rates, which may be attributed to skin absorption dynamics. Surface type should be considered for assessing Φ6 transfer rates. SIGNIFICANCE AND IMPACT OF THE STUDY: Although the persistence of Φ6 on fomites has been characterized, limited data are available regarding the transfer of Φ6 among skin and fomites. Determining Φ6 transfer rates for surfaces in consumer-facing environments based on these factors is needed to better inform future virus transmission mitigation strategies.

Persistence of SARS-CoV-2 on surfaces and relevance to the food industry.

Determining the prevalence and persistence of viruses outside the human host aids our ability to characterize exposure risk across multiple transmission pathways. Since 2020, the Coronavirus Disease 2019 pandemic has resulted in a surge of research regarding severe acute respiratory syndrome-coronavirus-type 2 (SARS-CoV-2) and its potential to spread via direct and indirect contact transmission routes. Here, the authors discuss the current state of the science concerning SARS-CoV-2 transmission via contaminated surfaces and its persistence on environmental surfaces. This review aims to provide the reader with an overview of the currently published SARS-CoV-2 persistence studies, factors impacting persistence, guidelines for performing persistence studies, limitation of current data, and future directions for assessing SARS-CoV-2 persistence on fomites.

3D Printed Instrument for Taylor Dispersion Analysis with Two-Point Laser-Induced Fluorescence Detection.

Precisely controlling the size of engineered biomolecules and pharmaceutical compounds is often critical to their function. Standard methods for size characterization, such as dynamic light scattering or size exclusion chromatography, can be sample intensive and may not provide the sensitivity needed for mass- or concentration-limited biological systems. Taylor dispersion analysis (TDA) is a proven analytical method for direct, calibration-free size determination which utilizes only nL-pL sample volumes. In TDA, diffusion coefficients, which are mathematically transformed to hydrodynamic radii, are determined by characterizing band broadening of an analyte under well-controlled laminar flow conditions. Here, we describe the design and development of a 3D printed instrument for TDA, which is the first such instrument to offer dual-point laser-induced fluorescence (LIF) detection. The instrument utilized a fully 3D printed eductor as a vacuum source for precise and stable pressure-driven flow within a capillary, evidenced by a linear response in generated static pressure to applied gas pressure (R2 = 0.997) and a 30-fold improvement in stability of static pressure (0.05% RSD) as compared to a standard mechanical pump (1.53%). Design aspects of the LIF detection system were optimized to maximize S/N for excitation and emission optical axes, and high sensitivity was achieved as evidenced by an 80 pM limit of detection for the protein R-Phycoerythrin and low nM limits of detection for three additional fluorophores. The utility of the instrument was demonstrated via sizing of R-Phycoerythrin at pM concentrations.

Factors Impacting Persistence of Phi6 Bacteriophage, an Enveloped Virus Surrogate, on Fomite Surfaces.

The persistence of Phi6 (Φ6) bacteriophage on surfaces commonly encountered in consumer-facing environments was evaluated. Φ6 has been utilized as a surrogate for enveloped viruses, including SARS-CoV-2-the causative agent of COVID-19-due to structural similarities, biosafety level 1 (BSL-1) status, and ease of use. Φ6 persistence on fomites was evaluated by characterizing the impact of the inoculum matrix (artificial saliva, phosphate-buffered saline [PBS], tripartite), inoculum level (low and high), and surface type (nonporous-aluminum, stainless steel, plastic, touchscreen, vinyl; porous-wood). Φ6 was inoculated onto surfaces at low and high inoculum levels for each inoculum matrix and incubated (20.54 ± 0.48°C) for up to 168 h. Φ6 was eluted from the surface and quantified via the double agar overlay assay to determine virus survival over time. For nonporous surfaces inoculated with artificial saliva and PBS, significantly higher D values were observed with high inoculum application according to the 95% confidence intervals. In artificial saliva, D values ranged from 1.00 to 1.35 h at a low inoculum and 4.44 to 7.05 h at a high inoculum across inoculation matrices and surfaces. D values for Φ6, regardless of the inoculum level, were significantly higher in tripartite than in artificial saliva and PBS for nonporous surfaces. In contrast with artificial saliva or PBS, D values in tripartite at low inoculum (D values ranging from 45.8 to 72.8 h) were greater than those at high inoculum (D values ranging from 26.4 to 45.5 h) on nonporous surfaces. This study characterized the impact of the inoculum matrix, inoculum level, and surface type on Φ6 survival on various surfaces relevant to fomite transmission in public settings. IMPORTANCE An important consideration in virus contact transmission is the transfer rate between hands and surfaces, which is driven by several factors, including virus persistence on inanimate surfaces. This research characterized Φ6 persistence on surfaces commonly encountered in public settings based on various factors. The inoculum matrix, which simulates the route of transmission, can impact virus persistence, and three separate matrices were evaluated in this study to determine the impact on Φ6 persistence over time. The number of microorganisms has also been suggested to impact persistence, which was evaluated here to simulate real-world contamination scenarios on six surface types. Results from this study will guide future research utilizing Φ6 or other surrogates for enveloped viruses of public health concern.

Synaptic connectivity to L2/3 of primary visual cortex measured by two-photon optogenetic stimulation.

Understanding cortical microcircuits requires thorough measurement of physiological properties of synaptic connections formed within and between diverse subclasses of neurons. Towards this goal, we combined spatially precise optogenetic stimulation with multicellular recording to deeply characterize intralaminar and translaminar monosynaptic connections to supragranular (L2/3) neurons in the mouse visual cortex. The reliability and specificity of multiphoton optogenetic stimulation were measured across multiple Cre lines, and measurements of connectivity were verified by comparison to paired recordings and targeted patching of optically identified presynaptic cells. With a focus on translaminar pathways, excitatory and inhibitory synaptic connections from genetically defined presynaptic populations were characterized by their relative abundance, spatial profiles, strength, and short-term dynamics. Consistent with the canonical cortical microcircuit, layer 4 excitatory neurons and interneurons within L2/3 represented the most common sources of input to L2/3 pyramidal cells. More surprisingly, we also observed strong excitatory connections from layer 5 intratelencephalic neurons and potent translaminar inhibition from multiple interneuron subclasses. The hybrid approach revealed convergence to and divergence from excitatory and inhibitory neurons within and across cortical layers. Divergent excitatory connections often spanned hundreds of microns of horizontal space. In contrast, divergent inhibitory connections were more frequently measured from postsynaptic targets near each other.

Influence of Free Chlorine and Contact Time on the Reduction of Salmonella Cross-Contamination of Tomatoes in a Model Flume System.

ABSTRACT: The process of washing tomatoes in dump (flume) tanks has been identified as a potential source of cross-contamination. This study's objective was to assess the potential for Salmonella enterica cross-contamination at various inoculation levels in the presence of free chlorine (HOCl) and organic matter. Uninoculated tomatoes were introduced into a laboratory-based model flume containing tomatoes inoculated with a cocktail of five rifampin-resistant S. enterica serovars at 104, 106, or 108 CFU per tomato in water containing 0 or 25 mg/L HOCl and 0 or 300 mg/L chemical oxygen demand (COD). Uninoculated tomatoes exposed to the inoculated tomatoes were removed from the water after 5, 30, 60, and 120 s and placed in bags containing tryptic soy broth supplemented with rifampin and 0.1% sodium thiosulfate. Following incubation, enrichment cultures were plated on tryptic soy agar supplemented with rifampin and xylose lysine deoxycholate agar to determine the presence of Salmonella. HOCl and pH were measured before and after each trial. The HOCl in water containing 300 mg/L COD significantly declined (P ≤ 0.05) by the end of each 120-s trial, most likely due to the increased demand for the oxidant. Higher inoculum levels and lower HOCl concentrations were significant factors (P ≤ 0.05) that contributed to increased cross-contamination. At 25 mg/L HOCl, no Salmonella was recovered under all conditions from uninoculated tomatoes exposed to tomatoes inoculated at 104 CFU per tomato. When the inoculum was increased to 106 and 108 CFU per tomato, cross-contamination was observed, independent of COD levels. The results from this study indicate that the currently required sanitizer concentration (e.g., 100 or 150 mg/L) for flume water may be higher than necessary and warrants reevaluation.

Phi 6 recovery from inoculated fingerpads based on elution buffer and methodology.

Phi 6 (Φ6) bacteriophage is a proposed surrogate to study pathogenic enveloped viruses including SARS-CoV-2-the causative agent of COVID-19-based on structural similarities, BSL-1 status, and ease of use. To determine the role of virus-contaminated hands in disease transmission, an enhanced understanding of buffer and method performance for Φ6 recovery needs to be determined. Four buffer types and three methodologies were investigated for the recovery of Φ6 from human fingerpads over a 30 min duration. Phosphate buffered saline (PBS), PBS + 0.1 % Tween, 0.1 M glycine + 3% beef extract, and viral transport medium were evaluated as buffers for recovery of Φ6 via a dish, modified glove juice, and vigorous swabbing method. Φ6 concentrations on fingerpads were determined at 0-, 5-, 10-, and 30-min post-inoculation. While there were observed differences in virus recovery across buffer and method types depending on the time point, log PFU recovery based on buffer type or methodology was not significantly different at any time point (P > 0.05). The results presented in this study will allow for future work on Φ6 persistence, transfer between hands and surfaces, and efficacy of hand hygiene methods to be performed using a well-characterized and validated recovery method.

Determining Bacterial Load and Water Quality Parameters of Chlorinated Tomato Flume Tanks in Florida Packinghouses.

ABSTRACT: Monitoring and maintenance of water quality in dump tanks or flume systems is crucial to maintaining proper sanitizer levels to prevent pathogen cross-contamination during postharvest washing of tomatoes, but there is limited information on how organic matter influences sanitizer efficacy in the water. The main objective of this study was to monitor water quality in flume tanks and evaluate the efficacy of postharvest washing of tomatoes in commercial packinghouses. Flume tank water samples (n = 3) were collected on an hourly basis from three packinghouses in Florida and analyzed for pH, total dissolved solids (TDS), free chlorine, chemical oxygen demand (COD), oxidation-reduction potential, and turbidity. Additionally, three flume-water samples were collected and tested for total aerobic plate count (APC), total coliforms (TC), and Escherichia coli. Fresh tomatoes (n = 3), both before and after washing, were collected and analyzed for the same bacterial counts. Turbidity, COD, and TDS levels in flume water increased over time in all packinghouses. Correlations observed include COD and turbidity (r = 0.631), turbidity and TDS (r = 0.810), and oxidation-reduction potential and chlorine (r = 0.660). APC for water samples had an average range of 0.0 to 4.7 log CFU/mL and TC average range of 0.0 to 4.7 log CFU/mL. All water samples were negative for E. coli. The average APC for pre- and postflume tomatoes from the three packinghouses was 6.0 log CFU per tomato and ranged from 2.2 to 7.4 log CFU per tomato. The average TC count was <1.5 and 7.0 log CFU per tomato for pre- and postwash tomatoes, respectively. There was no significant effect (P > 0.05) of postharvest washing on the microbiological qualities of tomatoes. Water quality in flume tanks deteriorated over time in all packinghouses during a typical operational day of 4 to 8 h.

Taylor dispersion analysis in fused silica capillaries: a tutorial review.

Biological and pharmaceutical analytes like liposomes, therapeutic proteins, nanoparticles, and drug-delivery systems are utilized in applications, such as pharmaceutical formulations or biomimetic models, in which controlling their size is often critical. Many of the common techniques for sizing these analytes require method development, significant sample preparation, large sample quantities, and lengthy analysis times. In other cases, such as DLS, sizing can be biased towards the largest constituents in a mixture. Therefore, there is a need for more rapid, sensitive, accurate, and straightforward analytical methods for sizing macromolecules, especially those of biological origin which may be sample-limited. Taylor dispersion analysis (TDA) is a sizing technique that requires no calibration and consumes only nL to pL sample volumes. In TDA, average diffusion coefficients are determined via the Taylor-Aris equation by characterizing band broadening of an analyte plug under well-controlled laminar flow conditions. Diffusion coefficient can then be interpreted as hydrodynamic radius (RH) via the Stokes-Einstein equation. Here, we offer a tutorial review of TDA, intended to make the method better understood and more widely accessible to a community of analytical chemists and separations scientists who may benefit from the unique advantages of this versatile sizing method. We first provide a tutorial on the fundamental principles that allow TDA to achieve calibration-free sizing of analytes across a wide range of RH, with an emphasis on the reduced sample consumption and analysis times that result from utilizing fused silica capillaries. We continue by highlighting relationships between operating parameters and critically important flow conditions. Our discussion continues by looking at methods for applying TDA to sample mixtures via algorithmic approaches and integration of capillary electrophoresis and TDA. Finally, we present a selection of reports that demonstrate TDA applied to complex challenges in bioanalysis and materials science.

Pathogen and Surrogate Survival in Relation to Fecal Indicator Bacteria in Freshwater Mesocosms.

The microbial quality of agricultural water for fresh produce production is determined by the presence of the fecal indicator bacterium (FIB) Escherichia coli, despite poor correlations with pathogen presence. Additional FIB, such as enterococci, have been utilized for assessing water quality. The study objective was to determine the survival times (first time to detect zero or censored) of FIB (E. coli and enterococci), surrogates (Listeria innocua, Listeria seeligeri, Salmonella enterica serovar Typhimurium, and PRD1), and pathogens (four strains each of pathogenic E. coli and Listeria monocytogenes and five Salmonella serovars) simultaneously inoculated in freshwater mesocosms exposed to diel and seasonal variations. Six separate mesocosm experiments were conducted for ≤28 days each season, with samples (sediment/water) collected each day for the first 7 days and weekly thereafter. Microorganisms survived significantly longer in sediment than in water (hazard ratio [HR] for water/sediment is 2.2; 95% confidence interval [CI], 1.79 to 2.71). Also, FIB E. coli survived significantly longer than FIB enterococcus (HR for enterococci/E. coli is 12.9 [95% CI, 8.18 to 20.37]) after adjusting for the sediment/water and lake/river effects. Differences in the area under the curve (calculated from log CFU or PFU over time) were used to assess pathogen and surrogate survival in relation to FIB. Despite sample type (sediment/water) and seasonal influences, survival rates of pathogenic Salmonella serovars were similar to those of FIB E. coli, and survival rates of L. monocytogenes and pathogenic E. coli were similar to those of FIB enterococci. Further investigation of microbial survival in water and sediment is needed to determine which surrogates are best suited to assess pathogen survival in agricultural water used in irrigation water for fresh produce. IMPORTANCE Contamination of fresh produce via agricultural water is well established. This research demonstrates that survival of fecal indicator bacteria, pathogenic microorganisms, and other bacterial and viral surrogates in freshwater differs by sample type (sediment/water) and season. Our work highlights potential risks associated with pathogen accumulation and survival in sediment and the possibility for resuspension and contamination of agricultural water used in fresh produce production. Specifically, a greater microbial persistence in sediments than in water over time was observed, along with differences in survival among microorganisms in relation to the fecal indicator bacteria E. coli and enterococci. Previous studies compared data among microbial groups in different environments. Conversely, fecal indicator bacteria, surrogates, and pathogenic microorganisms were assessed within the same water and sediment mesocosms in the present study during four seasons, better representing the agricultural aquatic environment. These data should be considered when agricultural microbial water quality criteria in fresh produce operations are being determined.

Autonomous Purkinje cell activation instructs bidirectional motor learning through evoked dendritic calcium signaling.

The signals in cerebellar Purkinje cells sufficient to instruct motor learning have not been systematically determined. Therefore, we applied optogenetics in mice to autonomously excite Purkinje cells and measured the effect of this activity on plasticity induction and adaptive behavior. Ex vivo, excitation of channelrhodopsin-2-expressing Purkinje cells elicits dendritic Ca2+ transients with high-intensity stimuli initiating dendritic spiking that additionally contributes to the Ca2+ response. Channelrhodopsin-2-evoked Ca2+ transients potentiate co-active parallel fiber synapses; depression occurs when Ca2+ responses were enhanced by dendritic spiking. In vivo, optogenetic Purkinje cell activation drives an adaptive decrease in vestibulo-ocular reflex gain when vestibular stimuli are paired with relatively small-magnitude Purkinje cell Ca2+ responses. In contrast, pairing with large-magnitude Ca2+ responses increases vestibulo-ocular reflex gain. Optogenetically induced plasticity and motor adaptation are dependent on endocannabinoid signaling, indicating engagement of this pathway downstream of Purkinje cell Ca2+ elevation. Our results establish a causal relationship among Purkinje cell Ca2+ signal size, opposite-polarity plasticity induction, and bidirectional motor learning.

A microfluidic bubble perfusion device for brain slice culture.

Ex vivo brain slice cultures are utilized as analytical models for studying neurophysiology. Common approaches to maintaining slice cultures include roller tube and membrane interface techniques. The rise of organ-on-chip technologies has demonstrated the value of microfluidic perfusion culture systems for sampling and analysis of complex biology under well-controlled in vitro or ex vivo conditions. A number of approaches to microfluidic brain slice culture have been developed, however these typically involve complex design, fabrication, or operational parameters in order to meet the high oxygen demands of brain slices. Here, we present proof-of-principle for a novel approach to microfluidic brain slice culture. In this system, which we term a microfluidic bubble perfusion device, principles of droplet microfluidics were employed to generate droplets of perfusion media dispersed between bubbles of carbogen gas, and brain tissue slices were perfused with the resulting monodispersed droplets and bubbles. The challenge of tissue immobilization in the flow system was addressed using a two-part cytocompatible carbohydrate-based tissue adhesive. Best practices are discussed for perfusion chamber designs that maintain segmented flow throughout the course of perfusion. Control of droplet and bubble volumes was possible across the range of ca. 4-15 µL, bubble generation frequency was well controlled in the range ca. 1-7 bubbles per min, and bubble duty cycle was well controlled across the range ca. 20-80%. Murine hypothalamic tissue slices containing the suprachiasmatic nuclei were successfully maintained for durations of 8-10 hours, with tissue remaining viable for the duration of perfusion as assessed by Ca2+ imaging and propidium iodide (PI) staining.